|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Pneumatic Portable Waste 80L Oil Collecting Machine Change Extractor | Oil Tank Capacity: | 80L |
|---|---|---|---|
| Barrel Size: | 50*43*93cm | Oil Basin Capacity: | 10L |
| Cup Size: | 28*28*50cm | Air Pressure: | 8-10kg/cm |
Using compressed air, the transparent measuring cup and storage tank will be vacuum-pumped by a specially designed vacuum generating device to produce a certain degree of vacuum, and the oil will be pumped into the transparent measuring cup or storage tnak through the suction pipe.
| Vauum Degree:0-minus0.008mpa | Φ6.5mm collecting speed:1.6L/min |
| Air Pressure:8-10kg/cm | The greatest pressure:4kg/cm2 |
| Oil Tank Capacity:80L | Barrel size:50*43*93cm |
| Oil basin Capacity:10L | G.W./N.W.:19.5/17.5kg |
| Medium:Lubricating oil | Cup size:28*28*50cm |
| Φ4.5mm collecting speed:0.8L/min | G.W./N.W.:5.7kg/5kg |
Access to the vacuum speed, negative pressure ability strong, belongs to the utility model, or without lifting device or gutter, are applicable, high transparency measuring cup, primary observation was carried out on the oil and oil amount is calculated. All functions using compressed air as the power, guarantee the operation safety, environmental protection, low consumption, using the negative pressure principle, memory and measuring cup extraction vacuum negative pressure formed at the same time, through the air, is not restricted by air line move, recycling for many times, save time, improve work efficiency, is necessary for car repair oil change.
What do you do?
Our products mainly include electric oil, gear oil pump series, spanner, tow rope, high pressure gas cylinder, high and low position conveyor, pneumatic oil injector injector.
Do we accept customization?
Yes, we can accept customization.
Can you help us to do some change about your product?
Yes, special drawing and design will be evaluated by our technical department, unit cost will be calculated by finance department for your final confirmation. All procedures will be informed and confirmed with you in advance.
Can I get a sample?
Yes. Samples are welcome to us before mass production. But few extra cost and products cost will be charge from customer first, and sample cost will be back to customer once started mass production.You need to pay the express fee.
Are you a factory or trading company?
xianxian zhongtuo hardware tools co.,LTD is specialized in the production and development of automobile repair tools,equipment and sales as one of professional manufacturers.
Contact Person: Zhongtu
Tel: +8619133717489
